This month my wife and I visited Tasmania and rode the Ida Bay Railway, West Coast Wilderness Railway and saw some railroad activity along the way. Modelling activities took the back seat however I did get to Wayne's twice.
Ida Bay Railway
Departing Ida Bay Station the trip is a two hour (return) train journey that travels the historic 7.3 kilometre track, which was originally used to cart limestone to ships at Deep Hole. You can ride in an open or closed carriage, while you journey through the scenic bush. There's a brief stop at graveyard where your tour guide tells you about some of the history. Back on the train the trip continues to Deep Hole. There is a break of about 15 minutes to walk around at the beach before returning.
Here is a link to the video of the ride from Deep Hole to Ida Bay.
Check out their website.
Wilderness Railway - Queenstown Explorer
West Coast Wilderness Railway Tasmania. The Queenstown Explorer a steam train running Strahan–Queenstown–Strahan including the King River Gorge, the “rack” section of the railway track, magnificent rainforest and a number of stations along the way.
6.5% grade! |
Our coach |
Lots of places where the clearance was tight - it was all hand dug! |
A section of track with the rack |
The ABT cog arrangement |
Locomotive pinion |
The end of the rack and pinion section |
Looking over the drivers shoulder.... |
It was a great trip but a long day 7:45am arrival and back close to 6pm.
I put together a video with some highlights...
Here is a link to their website.
Tasmanian Railway Oberservations
Devonport
Burnie
Cradle Mountain to Hobart
West Coast Heritage Centre, Zeehan
Devonport
Kaye snapped this shot from the Spirit of Tasmania just before departure for Melbourne.
An aside
Whilst taking photos in Burnie I was approached by a Tasrail employee doing the security thing... It turns out he owns 830 Class 868. It is in Don River Railway Museum, Devonport, it started work in Peterborough and finished in Pt Lincoln before another life in Tasmania. He sent me the photos below.
Speedometer - Arduino Based
I ordered the bits mainly from AliExpress and have "bagged them up in sets".
I need to build one or two and take photos and write instructions as many of the recipients have never undertaken building an electronic project let alone one with a microprocessor!
Visits to Wayne's
Ops Session
We had one ops session and whilst it was warm and I was feeling a bit off colour the stress showed through my sweating...
Chris, Des & Rosslyn at Lowood Crossing |
Barry & Wayne at Dunkleigh Towers |
We enjoyed refreshments after the run.
Scenery Session
I introduced some of those attending to the mix used by Joe Fugate so I did part of a bank and Don had a go at a creek bed that will have pools of water and a lake.
I add some of this in varying amounts to vary base colours |
Don and his work on the creek bed.
Des installed some Heki rock wall securing it with hot glue..
John worked on the platform area for the passenger station - a lot of work to get it to the correct height.
Assembly of the Peco platform fascia
We all had a great work session which was followed by a BBQ with wine!
Till the end of December.....
-ooOOOoo-
No comments:
Post a Comment